Built to interior design standards, it features bevel cut face, crisp corners, and smooth finish. They come in a wide variety of beautiful fabrics and is trimmed out by a paintable white picture frame. The ASC Sound Panel is completely finished on all sides, including the back.
A Balanced Blend of Absorption and Diffusion in the Treble Range…
The ASC Sound Panel is completely finished on all sides, including the back. It is lightweight and easily mounts vertically or horizontally to walls, working to soften sharp sounds in the vocal range that otherwise reflect off of walls, but without over damping. The SoundPanel is useful in a wide a variety of application areas from recording studios and audiophile listening rooms to office interiors, restaurants and even classrooms.
The SoundPanel calms excessive room reflections by acting as a “speed bump” for sound. This in turn helps to open up the sound stage and sharpens imaging without over-absorbing. The Panel also provides considerable soft diffusion with a reflecting strip that comes into play above 400Hz. The shape of the Panel, with its distinctive bevel and vinyl frame, also helps to scatter concentrated sound waves in key parts of the listening room. Typically, an array of SoundPanels is installed symmetrically on each side wall, vertically centered and in line with the listening position. Additional Panels are often installed on the front wall behind the speakers.
The SoundPanel provides a combination of even absorption for bass frequencies within the second and third octave and absorption and diffusion for treble frequencies. The SoundPanel boasts of sturdy lightweight construction and integrates beautifully into any room it becomes part of.
Each Panel: 8″ wide x 48″ high (2″ thickness)
(testing done in-house by ASC)
Custom Fabric Colors
Any product using our Guilford Stock Fabrics can have one of our 70+ custom fabrics ordered.
Custom Fabric Pricing is 10% additional, minimum $175/order.
- If your selection is 499.00, the total cost for custom fabric is 499.00+50.00=549.00
Custom fabric does not impact shipping costs or product weight.
We carry many custom colors in our factory, but this is not guaranteed. Orders requesting custom fabric will require 1-2 weeks lead time based on availability. Contact us for details and availability.
TubeTraps (all variations)
- Standard TubeTraps products are built taller than the nominal listed height by 1/2″ to 3/4″
- Maximum available single height for any full-round product is 48 1/2″
- Custom Sizes under 4′ available
- All of our TubeTrap products are also ~3/8″ oversize in diameter.
These are built within 1/8″ tolerance.
- A 13 x 3ft TubeTrap will have a diameter of 13 3/8″ and a length of approximately 36 5/8″
- A 16 x 46″ Custom made TubeTrap, which will have a diameter of 16 3/8″ and a length of 46″ +/- 1/8″
This includes but is not limited to:
- IsoThermal TubeTraps
- Quarter Rounds
- Half Rounds
- TowerTraps (all variants)