Customization & Size Ordering
We will do everything possible to ensure that the WindowPlug fits perfectly into your opening of choice. The final goal is for the wooden-frame portion of the WindowPlug to rest approximately 1/8″ inside of your opening around the entire perimeter, with the green technical felt supplying adequate tension to keep the unit in place. This means that the unit you receive should be slightly larger than the opening, when measured by the size of the felt.
The way we accomplish this is only through precise measurements provided by YOU, the customer. We typically require six measurements to be provided with each WindowPlug order. By analyzing these measurements performed at various locations, we are able to determine how far out of square your opening actually is. Depending on several factors, price or design revisions may be made at this point in the process.
For the accuracy of these measurements, measure the inside of the window frame. We need measurement of the width of the top and bottom (C & D), the height of both sides (A & B) and the diagonal measurements from each opposite corner (E & F).
After everyone agrees upon the final size and shape of your WindowPlug, the unit is handcrafted and left to cure for a minimum of 10 days prior to shipment, to minimize warping during shipment or installation. The size of most WindowPlug units requires motor freight shipment using a pallet, so order consolidation is important in keeping costs low.
