• SubTrap

    From $699

    Bass Refined

    You keep your subwoofer's volume turned down and the crossover set low so it can “support” the bottom end without drowning out the music. But... you know you can do better.The SubTrap absorbs excess bass (the bad, muddy bass) and decouples your subwoofer from the floor and elevates it out of the vertical mode stimulation zone. While increasing bass extension and punch, the SubTrap also gets rid of the dreaded "one note bass". Utilizing our patented Isothermal technology to boost the low bass absorption, the ASC SubTrap should be the foundation of your acoustic control plan.It's much more than a simple vibration isolation stand... now you can "raise" your subwoofer to its full performance potential. Simply place your subwoofer atop the SubTrap. You'll instantly improve sonic detail, changing “fuzzy” playback into a richly detailed picture by lowering the running noise floor of the room in the all-important low bass range. From there, build your musical experience with rich harmonics and a lush, and immersive soundstage. You'll hear musical bass lines you never knew existed!
    Applications:
    • Two-channel HiFi Listening
    • Home Theater
    • Home Studio
    • Professional Recording/Mixing Studio
    • Live Sound Environments / Rehearsals
      SubTraps are made to order
  • WallDamp

    From $44
    WallDamp is a component of ASC's IsoWall System, used to construct walls & ceilings that reduce sound transmission by 20dB or greater compared to standard interior walls.Combining vibrational damping with classic resilient channel decoupling makes our wall system among the highest available using standard single-stud construction. Internally, the walls are tempered to move with the air pressure of bass frequencies. Where a rigid wall would shudder at high volumes (similar to the distortion in an overdriven speaker) and raise the noise floor of the room considerably, an IsoWall will "bend" with the pressure and absorb the sub bass sound wave to prevent excessive low frequency reverberation.Check out our:
  • Metal channel used within the IsoWall system to decouple the drywall from the framing. Proper installation results in zero mechanical connection between the drywall and framing members. Its design also allows flexure of the walls which promotes shear stress inside the damping material, adding deep bass trapping to your room's acoustic treatment.Suitable for both walls and ceiling. When used in the IsoWall system, spacing on walls is 24" on center, on ceilings 12" on center. Do not overhang the last stud or joist by more than 6 inches.
  • ASC's WindowPlug excels at reducing road and traffic noise intrusion into your bedroom or workspace. Landscaping equipment, utility trucks, neighboring dogs, heat pumps, backup generators... the list goes on of the nuisances you will be able to block from interrupting your peace and quiet.If you are the one making noise (mixing down your latest recording, wailing out an electric guitar solo, watching an action movie, or performing home dentistry), the WindowPlug can be, installed and removed as needed to maintain the peace in your neighborhood.
  • The IsoTile Ceiling Panel is designed to isolate and absorb ceiling transmitted noise in both directions. Just drop in place on top of your existing acoustic ceiling tiles. ASC’s IsoTile is engineered to block and absorb sound.
  • The SoundFence reduces the noise from heat pumps, pool filters, pool pumps, traffic, highways and more. ASC's SoundFence is ideal for noisy neighborhoods and residential areas.
    You build the fence, we supply the sound-absorbing inserts. Our unique design does not block the sound and reflect it back at the source, rather, it converts it into heat through porous absorption. The result is a quieter home, and a quieter neighborhood. Be a good neighbor, install SoundFence around your heat pump today!Pricing for popular sizes are as follows: 2'x4' = $450/section, 4'x6' = $670/section, and 5'x8' = $850/section.  Sections are built with a solid cedar frame and weatherproof polyester finish to protect the sound absorbing insides, and are 3" thick to fit smoothly into a standard privacy fence, or any other fence using 2x4 runners on edge.  
  • ASC WallWool Sound Barrier has 10x more absorption that standard wall fiberglass insulation. ASC WallWool has been formulated to provide maximum sound attenuation in a relatively thin package. There is no fiberglass resin adhesive in this material and no odor.
Go to Top