Newsletter
What is Head-end Ringing?
This week we discuss the audio condition known an Head-End Ringing.
We read from the writings of ASC Founder and TubeTrap inventor Art Noxon, PE AcousticalEnjoy!
Head-end Ringing
The term Head End Ringing coined by ASC President Art Noxon, succinctly describes a complicated phenomenon that destroys the articulation and intelligibility of your room. Everyone knows about wall reflections and bass build-up in corners, many even understand the influence of time delay and reflection level on sound stage and stereo imaging. But what about the build-up of early reverberation in the plane of the speakers? The phenomenon raises the running noise floor in the room to detrimental levels.
What Happens First?
Some portion (up to 80%) of sound expelled from a loudspeaker is projected in a direction other than towards the listening position. This is either projected upwards, downwards, backward or laterally. This sound collects within the X-Z plane, and is momentarily “trapped” up in the front (Head End) of the room.
What Happens Next?
This trapped sound slowly expands through the room, weakening as it travels toward the listener. The weakened, time-delayed sound reaches the listening position well after the direct signal + early reflections. This is different than room RT60.
Let’s See it in Action
ASC set up a test according to the following diagram. Balloon bursts proved to simulate an impulse response most effectively, so were used for the final testing.
The Control
A balloon was first popped outdoors in a grassy field to capture the response curve without room reflections and without the dreaded Head End Ringing. The audio was run through a strip chart and displayed as voltage versus time. Note the very fast and smooth decay.
The Close Microphone
A similar balloon was popped in the test room opposite the “dead end” with the microphone less than a foot away. Once again the audio was run through a strip chart and displayed as voltage versus time. Note the increased sound level because of all the early reflections, along with somewhat of a dog-leg slope, with a fairly long overall decay.
The Far Microphone
The other channel of the same balloon pop recording was fed by a microphone located at the “dead end.” Once again the audio was run through a strip chart and displayed as voltage versus time. Note the even higher sound level of the onset and then another huge bump in level around 35 milliseconds. This is the head end ringing washing over the mic after slowly marching its way down the room. Overall decay (RT60) is similar to the close mic.
My RT60 is good and frequency response is flat
- How can you hear the details of the music if the sound level does not die down between notes?
- Where does the low-level imaging and dynamic information come from if the running noise floor is a mere 10 dB below the direct signal?
- How are you ever going to reduce the buildup of early reverberation in the front of your audio room?
So that’s what that is…
Thanks Art! Now we’re understanding what’s happening in our listening spaces. There’s more learning to do about the benefits of TubeTraps and much more about ASC’s acoustic treatments at AcousticSciences.com
Have a great sounding weekend!
~Team TubeTrap
ASC will be attending our “local” HiFi show in Seattle, the Pacific Audio Fest 2024, Sept. 6-8. We are thrilled to be returning to year three and will be bringing a literal truckload of TubeTraps for the benefit of exhibitors and attendees alike. ASC will have a booth in the marketplace, stop by and say hi!
Also, ASC Founder and TubeTrap inventor Art Noxon, PE Acoustical will be giving a talk. Don’t miss it!
