Equipment Baffles

When the manufacturer can’t supply the hush kit you need, we can.

Acoustic Sciences Corporation also make custom solutions to help quiet any kind of high noise air handler or cooling system. The ASC staff will engineer an add-on unit designed to seamlessly fit your existing air intake and/or exhaust. High noise air handler situations, such as those found in the cooling systems for large electronic switching centers, can cause hearing loss for unprotected workers on site. Our goal is to reduce the noise level to OSHA acceptable levels or better.

Row after row of electronic signal processing cabinets are usually cooled by vented updrafts from the air conditioning plenum under the floating floor, but not always. Hot spots in equipment cabinets get extra cooling from air flow booster fans and blowers which always makes unplanned-for noise. That’s when a custom run of Acoustic Sciences Corporation's matching noise baffles need to be designed, built and delivered.

It’s a big team project, with their engineers, technicians and managers on one side and our in-house staff on the other. Typically our clients will ship or sometimes hand-deliver the blueprints and functioning parts of their noise making equipment. We also partner with a local group of talented specialty fabricators so we get the high quality metal fabrication and painting we need. The goals, along with the long list of constraints, are lined out by our client and we go to work. We measure the noise, and determine how it is made. We design and build models improving each one until it works as desired. We ship it to the client for further testing. After back and forth exchanges, and we all come to an agreement the production version of the baffle is designed. A sample is made and shipped. After it’s approved we fabricate the production run and deliver it.

Our happy customers include many smaller manufacturers and a few big ones, such as: FAA commercial and military airport ASR-9 radar sites, FAA air route traffic control center ARTCC sites, Westinghouse radar equipment, Raytheon contracts, Harris Corp Voice Switcher Cabinets, Liebert Air Handlers and Power Conditioners, EMC Corp’s huge hard drive memory cabinets, and for Texas Instruments, we developed our smallest baffle, about 3/8ths inch square, mounted to the flying head of their last heavy duty impact printer.

Acoustical Engineer and Design

Most baffles involve moving air and the system is already operating at maximum head loss. Additional significant back pressure is not an option. This means we need very slick surfaces so we don't produce drag on the air flow. We can't have abrupt changes in air flow speed or direction without causing additional head loss. This means we typically work with a 100% open, straight through air flow baffle design.

Source Attenuation: We analyze the noise that needs to be attenuated and where it is coming from. We locate sound appropriate sound absorbing materials in the area where the sound is the most intense so as to get the most attenuation our of a small amount of material. Frequently special aerodynamic shapes are required because the intense sound usually comes from the same place where intense originating air flows come from. We typically work well inside the bulk airflow, very close to the fan or blower.

FAA Airport Radar Equipment Noise Baffles

We developed the noise control package for the new Westinghouse airport radar sets starting in 1988 at LAX, and within 5 years had built and delivered these sets to the top 80 domestic commercial and military airport radar sites across the nation.

For the uninitiated, ASR-9 puts a dot on the Airport's Flight Control radar screen. Mode-S reads an aircraft's transponder and places the flight ID next to the dot on the radar screen. The regional ARTCC (Air Route Traffic Control Center) tracks in-flight movement. Each of these facilities have hardware rooms with very loud cooling fans. ASC engineered "noise suppression kits" for them which allow on-site technicians to work without the need for hearing protection.

Prior to this new radar set, the old ones still used vacuum tubes, which by then could only be purchased from Russia, not a good idea. The new set was transistorized. Initially it was planned to run silent and be cooled by air conditioning units on the roof. But as it came close to the first set being delivered, the rooftop cooling plan and equipment was scrapped and huge sets of fans were installed in the unit and vents were added so it could run without any air conditioning at all.

When the first test unit was installed at LAX, no one could talk to each other or talk on the phone when the radar set was running. We got the call and the rest is history.

Read More Details About FAA Airport Radar Equipment Noise Baffles »

 

Industrial Acoustics
Special Features:
High efficiency achieved by a 2 stage acoustic system.

 

Easy to position wheeled design.

 

Cabinets with handles for easy maintenance.

 

100% open airflow design preventing flow constriction.

 

Easy inspection of air filters through side viewing holes.

 

Compatible fit and color, sized for aisle clearance.

Read About FAA Noise Baffles:

NCP-10 system for ASR-9 Sites
NCP-8 system for Mode-S Sites
ARTCC Baffle System

Other Applications

Industrial Noise Control

HVAC Systems

Noise Control: Mufflers