An Easy to Install Flat Panel Noise Absorber
for the Factory Floor
The
Industrial SoundPanel is an affordable and easy to install acoustic
absorption device that attaches to the wall in high noise environments.
This is ideal for use in any factory or industrial environment where
tools make high levels of noise. It's easy to use ASC Sound
Panels as part of an OSHA compliance plan to bring noise levels
down to safe levels.
ASC
can custom manufacture these panels to any size or shape up to 4’
x 10’. Panels are covered with a fire rated super heavy duty
woven screen mesh to protect the acoustic fiberglass from flying
debris and mechanical abrasion; cleaning is as easy as blowing it
off with an airhose. Panels are available with optional 1/4”
MDF backing to provide added structural rigidity.
Engineered for Performance The Industrial SoundPanel is made to exacting standards
using only the finest US made components. It is intended to give
years of service in even the harshest of environments, all without
any down time or maintenance. Each Panel yields a specific amount
of sound absorption from 190 Hz to 2 kHz. ASC’s engineers
can determine with accuracy exactly how many panels you will need
and where to locate them to achieve a set level of sound reduction.
We
can engineer a custom plan that will give you the peace of mind
you deserve. To get started, fill out our Online
Info Request Form. We'll also need you to e-mail photos
and a rough site plan. This service entails a small fee which will
be applied to your SoundTrap order.
Easy to install Panels can be sized to your specifications or they can
be cut on-site using common carpentry tools. They are typically
mounted using screws, or glued using a panel adhesive. In some situations,
panels are mounted using Pin Anchors.
OSHA Compliance ASC’s
engineering department can design a noise abatement strategy using
Industrial SoundPanels that can apply as OSHA compliance credits.
We’ll determine best placement for maximum effect, as well
as how many you’ll need in order to reduce noise towards full
compliance. We may also specify other acoustic products to be used
in combination with panels.
Nobody likes to work in a noisy environment,
ASC can help.
The
Industrial SoundPanel is an affordable and easy to install acoustic
absorption device that attaches to the wall in high noise environments.
This is ideal for use in any factory or industrial environment where
tools make high levels of noise. It's easy to use ASC Sound
Panels as part of an OSHA compliance plan to bring noise levels
down to safe levels.
ASC
can custom manufacture these panels to any size or shape up to 4’
x 10’. Panels are covered with a fire rated super heavy duty
woven screen mesh to protect the acoustic fiberglass from flying
debris and mechanical abrasion; cleaning is as easy as blowing it
off with an airhose. Panels are available with optional 1/4”
MDF backing to provide added structural rigidity.
ASC’s
engineering department can design a noise abatement strategy using
Industrial SoundPanels that can apply as OSHA compliance credits.
We’ll determine best placement for maximum effect, as well
as how many you’ll need in order to reduce noise towards full
compliance. We may also specify other acoustic products to be used
in combination with panels. 
